Wall kit WES 150, this simple solution enables 150 mm fans to be used through the wall. The WES 150 includes a telescopic wall sleeve and louvre shutter
UltraSilence¨ ELS Mix & Match - Flush mounted cases with fire protection shutter K 90. Designed to be fitted to fire rated ducting so the damper prevents the fire entering the ducting, however the fan will burn away. Discharge to the top (as delivered) rotatable to the left or the right model or rear discharge model option. For single room applications of the ELS fans. Case models ELS-GUB & ELS-GUBR.
Reversing electronic speed controller for a maximum of 1.0 Amps induction load with a push button start/stop. In an attractive off white finish with an indicator light when switched on, suitable for surface mounting.
Set of replacement filters for Helios Heat Recovery units KWLC 250. Each filter set consists three filters - Standard pack - 1 x extract filter G3 and 2 supply filters; 1 x G3 filter and 1 x G5 filter.
These very quiet bathroom fans are the previous model to the current model and are for replacing existing fans. Producing a volume of 16 l/s & 28 l/s, at a sound level of just 47 dB(A). Two models ELS VEI 60 and ELS VEI 100 both models have built in interval, run on timer and delayed start. Capable of high pressures for long duct runs whilst showing very little loss in volume flow. Must be fitted to a casing to complete the fan.
Pack of 2 filters. These are the replacement filters for all ELS model prefixed with ELS VE, ELS VEZ, and ELS VEB etc The filter is replaced by opening the facia and using the tag on the filter to lift it out.. The model details are shown on the fan housing which can be seen when the facia section is removed.