Fan Speed Controllers
Electronic speed controller for a maximum of 1.0 Amps induction load with a push button start /stop. In an attractive off white finish with an indicator light when switched on, suitable for surface mounting.
Electronic speed controller for a maximum of 2.5 Amps induction load with a push button start /stop. In an attractive off white finish with an indicator light when switched on, suitable for surface mounting.
Electronic speed controller range for a maximum of 3.0, 6.0 and 10.0 Amps induction load with an on off switch which is illuminated to indicate when on. There 3 models in the range - ESA 3 i , ESA 6 i and ESA 10 i
Reversing electronic speed controller for a maximum of 1.0 Amps induction load with a push button start/stop. In an attractive off white finish with an indicator light when switched on, suitable for surface mounting.
Flush mounted two speed switch for up to 3 Amps for specified helios fans.
Flush mounted two speed switch for up to 3 Amps for specified helios fans.
Single phase auto transformer speed controller with 5 speed settings and off. The range has five models by fan amp rating - TSW 1.5, TSW 3.0, TSW 5.0, TSW 7.5 and TSW 10.0
Single phase auto transformer speed controller with overheat protection to protect the motor windings. The range has five models by fan amp rating - MWS 1.5, MWS 3.0, MWS 5.0, MWS 7.5 and MWS 10.0
Three phase auto transformer speed controller with 5 speed settings and off. The range has six models by fan amp rating - TSD 0.8, TSD 1.5, TSD 3.0, TSD 5.5, TSD 7.0 and TSD 11
Three phase auto transformer speed controller with overheat protection to protect the motor windings. The range has five models by fan amp rating - RDS 1, RDS 2, RDS 4, RDS 7 and RDS 11
Speed switch for two speed alternating current fans (SlimVent & RR). For fans not exceeding 12 Amps. Grey polymer casing suitable for surface mounting. Protection to IP 54.
Flush mounted two speed and on/off switch 3 Amp rated for specified helios fans. Suitable for the M1 range, DX fans and the MV range.
Electronic speed controller for direct control or nominal preset of EC fans with POTENTIOMETER INPUT. Additionally equipped with an enabling switch and LED display for the operating status (this feature is dependent on fan type).