Circular fan accessories with Spigots
Each product is available in different sizes, select the product then select the size you require.
A quick-fix method for connecting fans to ducting. The size matches the duct diameter and clamps over circular ducting and fan spigots. The anti-vibration foam eliminates vibration between the fan and ducting - quantity a pair. Ten sizes in the range from 180mm to 710 mm
A quick-fix mounting foot for securing the fan in position. RRK and RRK fans
A simple yet very effective way to reduce system noise in circular ducting, ideal for installing in the duct between the fan and the ventilated area. Supplied with spigots for easy installation in the circular ducting. Supplied in 89 diameters from 100mm to 400 mm.
A quick-fix method for connecting circular ducting to circular fan spigots reducing or increasing the size to the sizes specified in the reference e.g. RZ 100/80 connectts sizes 100mm to 80 mm diameter.
Quick and simple ducting to connect a fan to other parts of a system, flexible to form bends etc. as required. Supplied in 10 metre lengths yet supplied in a 60 cm box
Helios EKA NV electric duct heater with built in control to suit 120 to 400 mm ducting with an output of 1.2 to 6.0 kW single phase. Output temperature is set on the casing control which has a temperature set point indicator. The integrated temperature control contains temperature regulator which works by algorithm impulse/pause. With built in pressure switch, supply air sensor and air flow sensor
Helios EHR electric duct heater with spigots to suit 100 to 400 mm ducting with an output of 1.0 to 8.0 kW single phase and 9.0kW three phase. no controls included enquire for control options (accessories).
A quick-fix method for preventing backdraught through fans in ducting. The spigots match the duct diameter and spigot will take a flexible connector or match circular ducting, quantity one. Ten sizes in the range from 100mm to 400 mm
A quick-fix method for connecting fans to ducting through a roof terminating in a weatherproof cowl. Available in seven sizes. Supplied with a spigot connection of the diameter given in the code i.e. DDF 200 has a 200mm spigot. The unit is supplied with a lead flashing sheet to make installation simple.
Air filter box LFBR for in-line installation with circular ducting. Spigots on both ends are fitted with double lip rubber seals, matching nominal size ducting. Made of galvanised steel. Access panel fitted with clamp for easy filter change. Filter (G4 model) made of washable plastic fibre, class G4. Temperature resistant up to +100¼C. Fire resistant to DIN 53438 F1, self extinguishing, can be regenerated 10-15 times. 93.8% particle separation, dust storage capacity: 122g/m2.
Air Filter Grille for wall installation with built in filter. The grille is light grey polymer in an eggcrate design. Filter made of washable synthetic fibre, class G2. Designed for connection sizes upto 500 mm diameter.
Adjustable extract air valve for ceiling or wall mounting. These metal valves are finished in corrosion resistant high quality white epoxy paint,
Adjustable extract air valves for ceiling or wall mounting, with concealed opening and integral filter. These valves extract the air around the attractive off white face.
Replacement filter media for air filter box LFBR. Easy filter change filter media (G4 model) made of washable plastic fibre, class G4. Temperature resistant up to +100¼C. Fire resistant to DIN 53438 F1, self extinguishing, can be regenerated 10-15 times. 93.8% particle separation, dust storage capacity: 122g/m2.